返回首页 | 加入收藏 | 关于我们 | 联系我们

欢迎光临济南广大铝业有限公司官网!

铝板生产企业 铝卷良心厂家

全国服务热线131-5601-1888
0531-87895188
当前位置:首页 » 济南花纹铝板如何进行水洗?

济南花纹铝板如何进行水洗?

文章出处:www.brujobike.com 责任编辑:admin 发表时间:2014-10-30 17:33:40

济南花纹铝板在生活中作用是很大的,由于在生产过程中经;岢鱿种杷苫蚴瞧椎热毕,给生产过程带来很多麻烦,要想济南花纹铝板更漂亮,需要对其进行水洗处理,下面济南广大铝业的有关专家就给大家介绍一下花纹铝板是如何清洗的?
1、经碱蚀后花纹铝板表面会残留大连的碱蚀槽液膜,济南铝板的有关技术人员说这时我们要从有利于清洗产品的角度出发,第一个水槽的水要保持温度和碱性,就不要去更换水,为了使清洗效果更好,我们可以适当的其搅拌。
After alkaline etching pattern aluminum surface will be left Dalian alkaline etching grooves film, the technical staff Jinan aluminum say when we want conducive cleaning product point of view, the first tank of water to keep the temperature and alkalinity, is not going to replace the water, in order to clean better, we can appropriate their agitation.
2、济南铝板的有关技术人员建议使用循环流动水清洗,这样做的目的是为了;ぱ趸鄣恼J庇,因为在中和槽内有硝酸,它如果被带入到氧化槽中的话,就有可能形成不了氧化膜,或者在氧化槽中的杂质的增加,这样会加快氧化槽的老化。
Jinan technical staff recommended to use an aluminum plate cleaning circulation water, which purpose is to protect the normal time by the oxidation tank, neutralization tank as nitric acid, it was brought to the oxidation tank, if so, it is possible can not form an oxide film, or increasing the oxidation tank impurities, this will accelerate the aging of the oxidation tank.
3、化学抛光后的水洗,化学抛光后会从残留一些药液,济南铝板的有关技术人员建议第二水槽使用循环流动水洗,第一个水槽保持温度就行了。
After washing chemical polishing, chemical polishing will post some residual liquid from Jinan aluminum of the technical staff recommends the use of a second circulating water tank, the first tank to keep the temperature on the line.

4、济南花纹铝板在除油后后会残留一些药物和油垢,要将其清洗干净,以免在后续清洗中因携带油垢而产生不良品。
Jinan pattern aluminum in the oil after some residual drugs and grease, you want to clean, in order to avoid subsequent cleaning grease for carrying produce defective products.

 

济南铝板http://www.brujobike.com/

此文关键字:济南铝板
亚洲第一区在线,亚洲第一天堂无码专区,亚洲第一网站,亚洲第一无码xxxxxx